DERMALOGIC 360 - Towel Steamer Water Float Switch
Appliance Replacement Part, Water Float Switch for .
Instruction
- 1. To replace the float valve in your towel steamer you will want to first make sure that all the water has drained from the unit and the power has been disconnected.
- 2. After that is done, you will want to remove the covering at the bottom of the back of the unit to reveal where the water inlet connects with the valve. You can use a wrench or similar tool to loosen to the water line from the backside of the unit, and that should cause it to come loose on the inside of the unit.
- 3. After that you can remove the old float valve and insert the new one, screwing on the water line.
- 4. After that, make sure everything is well tightened, but not overtightened since the thread on the valve is plastic, and then replace all coverings.
- 5. The new float valve should now be fully functional and you can resume normal operation.